Licensed Iowa electricians · Mason City, IA
Electrician in Mason City, IA for Repairs, Panel Upgrades and Wiring
Mason City Electrical Works is a local electrical company based at 617 N Commercial Alley in Mason City. We fix electrical problems, replace fuse boxes and worn-out breaker panels, rewire older homes, and install outlets, lighting, EV chargers and generators. We work in homes, farms and small businesses across Mason City, Clear Lake and the towns of North Iowa.
Tell us what is happening. We will tell you what it most likely is, what to do right now, and what a visit involves.
● We take calls 24/7, including emergency calls.
Calls answered day and night
Emergency calls included
A written price first
Before any work starts
Permits pulled
And the work inspected
Licensed Iowa electricians
Based in Mason City
Electrical emergency
Need an emergency electrician in Mason City right now?
Deal with safety first, then call us. Most electrical emergencies get safer the moment the right breaker is off. If you were searching for a 24-hour electrician, this is the number: (641) 206-4616.
Call us day or night if
Day or night. Tell us what you see and we will tell you what to do next.
Call 911 first if
For a downed line or a street-wide outage, also call Alliant Energy at 1-800-255-4268. If your town runs its own electric utility, such as Osage, Forest City or Lake Mills, call that utility instead.
What to do while you wait
- Turn off the breaker for the affected circuit. If you cannot tell which one it is, and the panel is dry and safe to reach, turn off the main breaker.
- Unplug whatever was running on that circuit.
- Do not touch a wet panel, and do not stand in water to reach it.
- Keep everyone away from a damaged mast, meter or overhead wire.
- Call (641) 206-4616 and describe what you see. We will tell you what to do next.
Trust a strange smell
In July 2026 a homeowner in the 800 block of 5th Street SW noticed an odd smell one evening, then light smoke coming from a gable vent. The Mason City Fire Department found insulation smoldering in an upstairs bedroom ceiling and said the cause was electrical. The homeowner had already shut off the power and got everyone out, and the damage stayed limited to the ceiling and insulation. The department credited that quick action. If you smell something hot and cannot find it, turn the power off and call.
We take emergency calls day and night.
Electrical services
What does an electrician in Mason City do? Our electrical services
Most of the calls we take fall into seven kinds of work, for homes and for businesses. Each one is priced in writing before it starts. Pick one to see what it covers.
Electrical repair and troubleshooting
We find the cause before we replace anything. The usual culprits are a loose connection behind an outlet, a worn breaker, an overloaded circuit, a failed GFCI or a wire damaged inside a wall. You get the diagnosis in plain words and a price for the fix.
We fix
Electrical panel upgrades, replacement and repair
Many older Mason City homes still run on a fuse box or on 60 or 100 amp service. That is not enough for central air, an electric range and a car charger at the same time. We replace fuse boxes and worn-out breaker boxes, size the new service with a load calculation, and arrange the power shut-off with Alliant Energy or your town’s utility.
Not every panel needs replacing. A single failed breaker can be swapped. A loose bus connection or a corroded lug can sometimes be repaired. We tell you which it is, and why.
Panel work we do
House wiring and rewiring
We rewire older homes in full or in stages. Knob-and-tube, cloth-covered cable and ungrounded circuits can often be replaced one floor or one circuit at a time, starting with the circuits that carry the most load.
In plaster-and-lath houses we fish new cable through walls and ceilings wherever we can, and we tell you beforehand where plaster has to be opened. We also wire additions, finished basements, kitchens and baths.
Outlet replacement, switches, lighting and ceiling fans
What we install and replace
EV chargers, generators and surge protection
A Level 2 car charger needs its own 240 volt circuit, so we check your panel’s spare capacity first.
For outages, we install standby generators with a transfer switch, or an inlet and interlock for a portable generator. We also fit whole-home surge protectors at the panel.
Electrical maintenance and safety inspections
A safety inspection is the easiest way to find out what an older house really has. We open the panel, check connections for heat, test GFCI and smoke alarm circuits, and look at the service mast and meter base from the outside.
It is also what buyers, sellers and insurers usually ask for. You get a plain list of what is fine, what should be fixed soon, and what can wait.
Commercial and farm electrician services
We take repair and fit-out work for shops, offices, restaurants and rental buildings, including the older commercial blocks downtown. On farms and acreages we wire shops, pole barns and outbuildings, and run power to wells and yard lights.
Call with the scope and we will tell you plainly whether it is a job for us, and when we can do it without closing your doors.
Not sure which of these you need? Tell us the problem and we will tell you.
Older homes
Why do so many Mason City homes need electrical work?
Because Mason City’s houses are old. Census figures put the median Mason City home at 1956. Of the city’s roughly 14,240 homes, 30% were built before 1940, 58% before 1960 and 77% before 1980. That is more than 4,200 houses first wired for a few lights and a radio, now running air conditioners, microwaves, space heaters and computers.
What a house needs depends mostly on when it was built.
1956
Median year built
30%
Built before 1940
58%
Built before 1960
77%
Built before 1980

Homes built before 1940
These fill downtown, Rock Crest-Rock Glen and many of the streets closest to the city center. Expect some of the following:
None of this means the house is unsafe today. It does mean the wiring has no spare capacity, and many insurers ask about it. Knob-and-tube was built to shed heat into open air, which is why the electrical code does not allow it to be buried in insulation, and why an insulation contractor may refuse to work over it.
Homes built from 1940 to the mid-1960s
About 28% of Mason City homes were built between 1940 and 1960 alone. Two-prong outlets, cloth-covered cable and 60 or 100 amp service are typical. Kitchens often share one circuit, which is why the microwave and the toaster trip the breaker together.
Homes built from about 1965 to 1973
Some houses from these years have aluminum branch wiring. The wire itself is not the problem. The connections at outlets and switches loosen and overheat over time. They can be repaired with connectors made for the purpose, or the circuits can be replaced.
Federal Pacific, Zinsco and Pushmatic panels
Many homes from the 1950s to the 1980s still have a Federal Pacific Stab-Lok, Zinsco or Pushmatic breaker panel. These are at the end of their service life, and their breakers may not trip when they should. Home inspectors and insurers flag them, and replacement breakers are hard to find.
Prairie School and historic homes
Rock Crest-Rock Glen, along Willow Creek, holds one of the best-known groups of Prairie School houses in the country, and the Stockman House and the Historic Park Inn downtown were designed by Frank Lloyd Wright. Old houses like these need the same upgrades as any other, done with more care. We plan cable routes to keep original woodwork and plaster intact wherever we can.
Newer homes and lake houses
In newer homes, and in many Clear Lake houses, the wiring is usually sound and the question is capacity. An EV charger, a hot tub, a finished basement, a shop heater or a generator can each need more than the panel has left. A load calculation settles it before anyone spends money.
Rental houses and apartments
About one in three Mason City homes is rented, many of them older houses and upstairs apartments. Iowa requires a licensed electrical contractor for work on rental property. If an inspector, an insurer or a tenant has flagged something, we fix it and give you the paperwork.
Not sure what your house has behind the walls?
You do not need to know. Tell us roughly when the house was built, whether it has fuses or breakers, and what you are noticing. That is usually enough for us to tell you what is likely going on, whether it is urgent, and what a visit would look like.
We take calls day and night.
North Iowa weather
How do North Iowa winters, storms and the Winnebago River affect your electrical system?
Weather and water cause a large share of the electrical trouble we see in North Iowa.
Winter
January lows in Mason City average about 7°F, and the city gets around 44 inches of snow a year. Space heaters, heat tape and block heaters land on old 15 amp circuits that were never sized for them. Tripped breakers, warm outlets and melted plugs follow. Ice and heavy snow also load the overhead line and the service mast on the side of the house.
Storms and lightning
Thunderstorm season runs through the summer, and June is the wettest month at about 5.4 inches of rain. On April 12, 2022 an EF-1 tornado tore through the Eastbrooke neighborhood. During an overnight storm in late July 2025, the Mason City Fire Department answered four calls in under half an hour, including a fire next to a home’s electrical panel and a power line burning against a tree. Lightning was the suspected cause.
Water
Mason City averages about 36 inches of rain and melted snow a year. The Winnebago River reaches flood stage at 10 feet. On June 8, 2008 it crested at a record 18.74 feet and flooded homes and basements along the river. Willow Creek and Calmus Creek rise with it. A panel, outlet, sump pump circuit or furnace circuit that has been under water needs checking before it is switched back on.
Electrical fires
In one week in July 2026, the fire department put out two electrical fires in Mason City: the smoldering ceiling on 5th Street SW, and a fire on the first floor of the Mohawk Square building at 22 N Georgia Avenue. Old connections, overloaded circuits and arcing behind walls do not wait for a storm.

What helps
Warning signs
What are the signs you need an electrician?
Some signs mean stop using the circuit now. Others mean book a visit soon. This table covers the ones we are asked about most. A red edge means act now.
What you notice
What it usually means
What to do
Burning smell, or a warm or discolored outlet
Usually means: A connection is overheating
What to do: Turn that breaker off and leave it off. Call us
Half the house is dead, no breaker tripped
Usually means: One of the two power legs to the house, or the neutral, has failed
What to do: Call Alliant first, since the fault may be on their side. Then call us
Breaker trips again as soon as you reset it
Usually means: A short circuit or ground fault
What to do: Leave it off. Do not keep resetting it
Breaker trips when two appliances run together
Usually means: An overloaded circuit
What to do: Move one appliance. Ask about a new circuit
Lights flicker across the whole house
Usually means: A loose main connection, or a fault on the utility side
What to do: Call us. This one should not wait
One light flickers
Usually means: A loose bulb, a failing fixture or a dimmer that does not suit LED
What to do: Usually minor. Book a visit
Buzzing from the panel or a switch
Usually means: A loose wire or a failing breaker
What to do: Call us
A tingle from an appliance or a faucet
Usually means: A missing or broken ground
What to do: Stop using it. Call us
GFCI outlet will not reset
Usually means: No power reaching it, a worn device, or a real ground fault
What to do: Unplug everything on it and try once more. Then call
Lights dim when the air conditioner starts
Usually means: Often normal. If it is severe, the service may be undersized
What to do: Mention it at your next visit
Seeing one of these right now? Turn off that circuit if it is safe, then call. We take calls day and night.
Electrician cost
How much does an electrician cost in Mason City?
Most electricians charge a service call or first-hour fee, then bill by the hour or give a fixed price for the job. Across the U.S. in 2026, hourly rates run $75 to $150 and service calls $79 to $179. Ask for our current rate when you call. We give it before we come out, and you get a written price before any repair starts.
Most of what you pay for on a small job is not the part. An outlet costs a few dollars. The visit covers the drive, the license, the insurance and the time to do it safely. If you have several small jobs, save them for one visit.

2026 national price ranges for common jobs
These are national ranges. Your price depends on your house.
Replace a panel with a 200 amp panel
$1,300 to $4,000
Full service upgrade: panel, meter base and mast
$4,000 to $8,000
Rewire a whole house
$4 to $15 per sq ft
Level 2 EV charger circuit
$600 to $2,500
Whole-home surge protector
$325 to $650
Standby generator, installed
$9,500 to $18,000
Tax credits and rebates in 2026
The federal tax credits people still ask about have ended. The credit for panels and home efficiency work and the credit for solar and batteries both expired on December 31, 2025. The EV charger credit ended on June 30, 2026. Alliant Energy still runs rebate programs, and we will tell you if your job qualifies.
What moves the price up or down in Mason City
Affordable does not have to mean the cheapest quote. It means a fair price, the smallest safe fix, and no surprises on the bill.
Permits and code
Do you need a permit for electrical work in Mason City?
For most jobs, yes. Mason City has its own electrical inspector in the Development Services department at City Hall, 10 1st St NW (641-421-3620). A new circuit, a panel change or a service upgrade needs a city permit, and the inspector checks the work before it is closed up or before the power is reconnected.
We pull the permit, meet the inspector and give you the sign-off. Outside the city limits, in most North Iowa towns and on farms, the permit and inspection usually come from the state, and we handle that as well.
Can a homeowner do their own electrical work in Iowa?
Yes, in the home you own and live in. The work still has to be permitted and inspected. Rental property is different: Iowa requires a licensed contractor there. If you have started a job and want it checked or finished, call us. We would rather look at it than have you guess.
What changed in Iowa’s electrical code in 2026?
On June 2, 2026 Iowa signed House File 2800, which puts the whole state on the 2023 National Electrical Code with a few sections removed. Under the state code:
Not required is not the same as not worth having.
A surge protector costs a few hundred dollars and guards every appliance in the house, which matters in a place where summer lightning is routine. Arc-fault breakers exist to catch arcing inside walls and ceilings before it becomes a fire. We will tell you where each one earns its cost in your home and where it does not.
Who fixes what
Alliant Energy or an electrician: who fixes what?
People lose hours calling the wrong one. Alliant Energy serves most homes in Mason City and Cerro Gordo County, and in most homes the split works like this.
Alliant Energy looks after
You, through your electrician, look after

If the power is out
- Check whether the neighbors are out too.
- Check your main breaker.
- If the street is out, report it to Alliant at 1-800-255-4268 or on their outage map.
- If the neighbors have power and you do not, or only part of your house is dead, call us. That is when you need an electrician for the power outage, not the utility.
After a storm, Alliant cannot reconnect a house with a damaged mast, weatherhead or meter base. Its crews repair the incoming line and the meter, so that repair has to come first, and it needs a permit and an inspection.
Not on Alliant?
Not every town around Mason City is. Charles City is served by MidAmerican Energy. Osage, Forest City, Lake Mills, Rockford, Grafton and Corwith run their own city electric utilities. Many farms and acreages buy power from a rural cooperative such as Franklin REC, Prairie Energy, Butler County REC or Heartland Power. The same split applies: the utility owns the line and the meter, and the rest is yours. Tell us who sends your bill when you call.
Choosing an electrician
How do you choose the right electrician in Mason City?
The best electrician for your job is the one who can show you these five things. Check them with anyone you call, including us.
1
The license.
Iowa licenses electricians through the Electrical Examining Board. Ask for the number and look it up on the state’s license lookup.
2
The permit.
Ask who pulls it. If the answer is “you don’t need one” for a panel or new circuits, keep looking.
3
A written price.
A handshake number is how a $500 job turns into a much bigger bill.
4
What is included.
Permit fee, plaster patching, the trip out, cleanup.
5
A second quote.
For a rewire or a service upgrade, get two or three. A good electrician expects it.
How we work
1
You call.
Tell us what is happening and where. We ask a few questions and tell you whether it is urgent.
2
We look and test.
We find the cause and show you what we found.
3
You get a written price.
Where there is more than one way to fix it, we start with the smallest safe repair.
4
We do the work.
That includes the permit and the inspection where they apply.
5
We walk you through it.
You see what was done, and your panel is labeled so the next person can read it.
Who we work for
Who do we work for?
Owners of older homes who have been told the wiring, panel or fuse box needs attention
Older homeowners and their families who want a safety check and a fair price in writing
Home buyers and sellers with an inspection report and a closing date
Landlords and property managers with a tenant complaint, an insurance request or a unit turning over
Clear Lake homeowners and cabin owners getting a lake house ready for the season or closing it for winter
Owners of newer homes adding a car charger, a generator, a hot tub or a finished basement
Small businesses that need repairs or new circuits without losing trading hours
Farms and acreages that need power to a shop, a pole barn, a well or a yard light
Remodelers and builders who need a licensed electrician on the job
Service area
Where do we work? Mason City neighborhoods, ZIP codes and nearby towns
We are based at 617 N Commercial Alley in Mason City’s 50401 ZIP code. We work across the city and take calls from the towns and farms around it.
Mason City neighborhoods we serve
ZIP codes and towns we cover
In Mason City we cover 50401 and 50402. Beyond the city:
Cerro Gordo County
Clear Lake (50428), Rockwell (50469), Ventura (50482), Plymouth (50464), Rock Falls (50467), Swaledale (50477), Thornton (50479), Meservey (50457) and Dougherty (50433).
Franklin County
Hampton (50441), Sheffield (50475), Latimer (50452), Alexander (50420), Geneva (50633), Coulter (50431), Chapin (50427), Popejoy (50227) and Bradford (50041).
Hancock County
Garner (50438), Britt (50423), Klemme (50449), Kanawha (50447), Woden (50484), Corwith (50430), Goodell (50439) and Crystal Lake (50432).
Mitchell County
Osage (50461), St. Ansgar (50472), Stacyville (50476), Orchard (50460), Little Cedar (50454), McIntire (50455), Carpenter (50426) and Toeterville (50481).
Worth County
Northwood (50459), Manly (50456), Kensett (50448), Joice (50446), Fertile (50434), Hanlontown (50444) and Grafton (50440).
Floyd County
Charles City (50616), Nora Springs (50458), Rockford (50468), Rudd (50471), Marble Rock (50653), Floyd (50435) and Colwell (50620).
Winnebago County
Forest City (50436), Lake Mills (50450), Leland (50453), Buffalo Center (50424), Thompson (50478), Scarville (50473) and Rake (50465).
Kossuth and Webster counties
Wesley (50483) and Fort Dodge (50501).
Tell us your town when you call. We will say when we can get there and whether a trip charge applies.
We take calls 24/7.
FAQ
Frequently asked questions about electricians in Mason City
Still have a question? Call and ask. We take calls 24/7.

Call Mason City Electrical Works
If something electrical is worrying you, the quickest way to find out what it is and what it will cost is to call. Tell us what you are seeing. We will tell you what it most likely is and what to do next.
● We take calls day and night, including emergency calls.
Name
Mason City Electrical Works
Address
617 N Commercial Alley, Mason City, IA 50401
Phone
(641) 206-4616
Area
Mason City (50401, 50402), Clear Lake and the towns of Cerro Gordo, Worth, Floyd, Hancock, Mitchell, Winnebago and Franklin counties